ACR J10 Dive in and Mods

Recharge Switch.



Needs one so I put one next to mag release to make recharging a one-handed operation.
It sits nearly flush with the receiver.

5 Likes

Front end in the way of IR?
Not anymore.

3 Likes

Spring access.
That section is 5mm thick and the cut-out will not affect the structural integrity.
Still have to remove 1 pin but way easier than the alternative.

7 Likes

@Cruise, I am taking all of those ideas and applying them to my rebuild! Legend!

2 Likes

Have fun.
I’ll upload pics of the inbuilt tracer next time I have it apart.
BTW, you will see I cut a bit off the side of the battery door.
Doesn’t affect it’s function but much easier to get a thumbnail under it.

2 Likes

good idea, which pin though, and does it have to stay out?

You can see the black pin across the top of the spring guide.
This needs to be removed if and only when you want to remove the spring.

2 Likes

Hi all, just got my first blaster (ACR) and slowly putting together all the upgrades . Just wanted say how much I appreciate this site for all the helpful tips I’ve learnt. Cheers!

5 Likes


Something they should bundle with every ACR

Shout out to @Cruise for the tweak big ups! About to do the spring hole too
Cheers brother20200211_115031|690x388

1 Like

1 Like

Cool camo paintwork. :+1:

Neat!
You got skills. :+1:

Cheers brother cheer for the tips I’ve just stableized the barrel I have a vid but need to convert :+1:

1 Like

New additions.
DIY PEQ w Cree torch and UV laser
Muzzle brake

3 Likes

Reminds me of…

3 Likes

Good move. Many blasters have increased fps and accuracy simply with having a stiffer/more securely held barrel.

1 Like