Hey there. Was wondering if having an cnc metal v2 gearbox shell is necessary for running a mosfet such as a Perun v2 or warfet or is a nylon with 18:1 metal gears and red chaihia motor running bospro 11.1 and 1.3 spring good enough ?
It’s fine you can use them in nylon or cnc:+1:
Okay perfect. I won’t be installing one just yet but definitely will be soon. Also when soldering the mag terminals to the mosfet is there anything that I should have to add to the gearbox. I’ve seen some people install the Perun v2 mosfet and there is a nylon peice that holds the terminals ?
If it’s a gen 9 you just use the existing terminals and wire and solder them to the mosfet wiring
Perfect thanks heaps !!